What Is IGF-1 LR3? Long R3 IGF-1 Structure and Chemistry Explained

October 12, 2026

What Is IGF-1 LR3? Long R3 IGF-1 Structure and Chemistry Explained

What Is IGF-1 LR3 (Long R3 IGF-1)?

IGF-1 LR3 is an 83-residue recombinant analogue of insulin-like growth factor-I. It takes the 70-residue IGF-I chain, adds a 13-residue N-terminal extension (MFPAMPLSSLFVN), and replaces the glutamate at position 3 with arginine, the “Long” and “R3” in its name. Those two changes lower its affinity for the IGF-binding proteins while it stays a ligand of the type 1 IGF receptor (IGF-1R). It weighs about 9.1 kDa, carries CAS 143045-27-6 and UNII M9L22Y19H9, and is a folded protein rather than a short peptide.

Chemical Identity of IGF-1 LR3

It is a single-chain, 83-residue protein built on the IGF-I fold, stabilized by three disulfide bonds and modified at the N-terminus and at position 3.

Native insulin-like growth factor-I is a 70-residue protein with the same three-disulfide architecture as insulin. IGF-1 LR3 keeps that core and makes two deliberate edits: a 13-residue hydrophobic extension (MFPAMPLSSLFVN) is appended to the N-terminus, and the glutamate normally found at position 3 of the IGF-I sequence is replaced by arginine. The three disulfide bonds pair Cys19 with Cys61, Cys31 with Cys74, and Cys60 with Cys65 along the 83-residue chain. Its chemical formula is C400H623N111O115S9 and its molecular weight is about 9.1 kDa (FDA GSRS, UNII M9L22Y19H9).

Molecular Data

Property Value
CAS# Not listed in PubChem
PubChem ID Not listed in PubChem
Molecular Formula Not listed in PubChem
Molecular Weight Not listed in PubChem
Exact Mass Not listed in PubChem
IUPAC Name Not listed in PubChem
InChIKey Not listed in PubChem
SMILES Not listed in PubChem
Molecular Class Recombinant 83-amino-acid IGF-I analog (Arg3 substitution plus 13-residue N-terminal extension)

PubChem has no compound record for IGF-1 LR3, so identifiers PubChem would verify are marked “Not listed in PubChem”. No structure image is shown.

The sections below walk through the chemistry, the structure in the Protein Data Bank, the receptor it binds, and how it compares with native IGF-I.

What Are the Key Identifiers for IGF-1 LR3?

The table gathers the verified identity data for the protein from authoritative public sources.

Item Detail Source
CAS 143045-27-6 GSRS / CAS
FDA UNII M9L22Y19H9 GSRS
Chain length 83 amino acids, single chain GSRS
Disulfide bonds Cys19-Cys61, Cys31-Cys74, Cys60-Cys65 GSRS
Molecular formula C400H623N111O115S9 GSRS
Molecular weight ~9.1 kDa (approximately 9120 Da) GSRS
Target receptor Type 1 IGF receptor (IGF-1R) Xu 2018; Li 2019

The two modifications are small relative to the whole chain, which is why IGF-1 LR3 keeps an IGF-I-like fold while behaving differently toward the binding proteins.

How Does IGF-1 LR3 Interact with Its Receptor?

It binds IGF-1R, a receptor tyrosine kinase, and the binding event switches the receptor into its active, self-phosphorylating state.

Crystallographic and cryo-EM structures show that a single ligand binds the Γ-shaped, asymmetric IGF-1R dimer. Binding separates the receptor domains by induced fit and brings the intracellular kinase domains together for trans-autophosphorylation (Xu et al., 2018; Li et al., 2019). Autophosphorylated IGF-1R then recruits insulin receptor substrate proteins (IRS-1/2) and Shc, which connect the receptor to the PI3K-AKT and RAS-MAPK pathways in cell systems (LeRoith et al., 2021).

How Does IGF-1 LR3 Differ From Native IGF-I?

The sequence changes make IGF-1 LR3 bind the IGF-binding proteins far more weakly than native IGF-I, while leaving the receptor-binding fold intact.

When the Long-[Arg3] analogue was first produced, side-by-side assays found it bound the binding proteins much more weakly than native IGF-I. The authors concluded that reduced binding-protein affinity, rather than stronger receptor binding, explained the analogue’s higher potency in those cell assays (King et al., 1992; Francis et al., 1992). The IGF-binding proteins (IGFBP-1 to IGFBP-6) normally hold IGF-I in complexes and control how much is free; their structure and IGF-binding mechanism are reviewed by (Forbes et al., 2012).

What Format Is IGF-1 LR3 Supplied in for Research?

Modern Aminos supplies IGF-1 LR3 as a 1 mg lyophilized powder in a 2R glass vial for in-vitro laboratory research. Each lot is documented by a third-party certificate; the current reports are listed in the COA search, and background on chromatographic testing is in the note on HPLC testing.

References

  1. Francis GL, Ross M, Ballard FJ, et al. Novel recombinant fusion protein analogues of insulin-like growth factor (IGF)-I indicate the relative importance of IGF-binding protein and receptor binding for enhanced biological potency. J Mol Endocrinol. 1992;8(3):213-23. PMID 1378742
  2. King R, Wells JR, Krieg P, et al. Production and characterization of recombinant insulin-like growth factor-I (IGF-I) and potent analogues of IGF-I, with Gly or Arg substituted for Glu3. J Mol Endocrinol. 1992;8(1):29-41. PMID 1311930
  3. Laajoki LG, Francis GL, Wallace JC, et al. Solution structure and backbone dynamics of long-[Arg(3)]insulin-like growth factor-I. J Biol Chem. 2000;275(14):10009-15. PMID 10744677
  4. Xu Y, Kong GK, Menting JG, et al. How ligand binds to the type 1 insulin-like growth factor receptor. Nat Commun. 2018;9(1):821. PMC5826941
  5. Li J, Choi E, Yu H, Bai XC. Structural basis of the activation of type 1 insulin-like growth factor receptor. Nat Commun. 2019;10(1):4567. PMC6783537
  6. Forbes BE, McCarthy P, Norton RS. Insulin-like growth factor binding proteins: a structural perspective. Front Endocrinol. 2012;3:38. PMC3356058
  7. LeRoith D, Holly JMP, Forbes BE. Insulin-like growth factors: Ligands, binding proteins, and receptors. Mol Metab. 2021;52:101245. PMC8513159

Frequently Asked Questions

What Is IGF-1 LR3?

IGF-1 LR3 (Long-[Arg3] insulin-like growth factor-I) is an 83-residue recombinant analogue of insulin-like growth factor-I. It adds a 13-residue N-terminal extension and swaps the glutamate at position 3 of the IGF-I chain for arginine, which lowers its affinity for the IGF-binding proteins while it remains a ligand of the type 1 IGF receptor (IGF-1R). Its CAS number is 143045-27-6 and its UNII is M9L22Y19H9.

Is IGF-1 LR3 a Peptide or a Protein?

It is a small single-chain protein of 83 amino acids folded by three disulfide bonds, weighing about 9.1 kDa. That makes it a recombinant polypeptide rather than one of the short synthetic peptides it is often shelved beside.

How Is IGF-1 LR3 Different From Native IGF-I?

Native IGF-I is a 70-residue chain with glutamate at position 3 and no extension. IGF-1 LR3 has a 13-residue N-terminal extension (MFPAMPLSSLFVN) and an Arg3 substitution. These two changes were introduced to weaken binding-protein capture rather than to change the receptor itself (Francis et al., 1992).

What Does IGF-1 LR3 Bind?

Like IGF-I, it binds the type 1 insulin-like growth factor receptor (IGF-1R), a homodimeric receptor tyrosine kinase. Structural studies show one ligand binds the asymmetric receptor dimer and triggers trans-autophosphorylation of its kinase domains.

What Is PDB Entry 3LRI?

3LRI is the NMR solution structure of Long-[Arg3]-IGF-I in the Protein Data Bank. It shows an IGF-I-like core with the main differences at a reoriented, flexible N-terminus (Laajoki et al., 2000).

Where Can Researchers Find IGF-1 LR3 for Laboratory Use?

Modern Aminos lists IGF-1 LR3 as a 1 mg lyophilized vial on its product page for in-vitro laboratory research, with a third-party certificate of analysis in the COA tab.

0